Check the exchange rates
West Country Welding Supplies

SIR Meccanica WS2 PLUS - West Country Welding Supplies, UK - West Country Welding Supplies, UK

SIR Meccanica WS2 PLUS

ws2+.jpgTecnical Characteristics

The machine is equipped with an electronic control panel with diagnostic display
TOOL HOLDER SHAFT DIAMETER mm 50   ( 1,97 in )
TOOL HOLDER SHAFT LENGTH mm

2660 usable mm (N° 3 connectable bars (1000mm+1000mm+720mm)

BORING DIAMETER mm 32 - 450   ( 1,25 in - 17,725 in )
WELDING  DIAMETER mm 25 - 450   ( 0,98 in - 17,725 in )
WELDING TECHNOLOGY   SPIRAL (CONTINUOUS WITH VARIABLE STEP)
LONGITUDINAL STROKE mm UNLIMITED WITH STEP OF 220 mm (8,66 in)
ROTATION MOTOR mm C/C (CE COMPLIANT)
FEED MOTOR mm C/C (CE COMPLIANT)
FEED SYSTEM mm ELECTRIC-MECHANICAL
OUTPUT TORQUE AT THE BAR mm

290 Nm (266 Rpm)

MAX ROTATION SPEED rpm 266
FEED RATE mm/rpm 0 - 0,5 ( 0 – 0,02 in / rev )
MAX FEED SPEED(w/rapid button) mm/min 285
REMOVAL MATERIAL cm³/min 23
DRIVE UNIT WEIGHT kg 35

Working Diameters

With Standard Equipment
IN-LINE BORING
Starting from ø 52 mm to over ø 450 mm

OVERLAY WELDING
Internal– from ø 25 mm to over ø 450 mm
External- from ø 20 mm to over ø 450 mm
Drilling – from ø 5mm to max ø 45 mm
Tapping – from ø 8mm to max ø 45 mm
with presetting for Tapping

Standard Equipment

N°1 DRIVE UNIT
N° 1 CONTROL PANEL

N° 1 CABLE FOR CONTROL PANEL

N° 1 CONTROL PANEL HOLDER

N° 3 CONNECTABLE MAIN TOOL HOLDERS ø 50 mm Lgth. 1000mm + 1000mm + 860 mm: Tot. Usable lgth. 2660 mm

N° 4 BEARING CARRIERS

N°24 BRACKETS FOR ADJUSTING DIAMETERS (N° 12 X 50 MM, N° 6 X 100 MM, N° 6 X 230 MM) 

N° 1 CENTERING KIT (2 RINGS - 6 BOSSES - 6 SCREWS M10x60 mm)

N° 6 THREADED BARS M10 X 250 mm FOR CENTERING KIT

N° 5 CARBIDE INSERTS

N° 1 TOOL HOLDER S10C x 50 mm (COMPLETE WITH WRENCH AND TORX SCREW)

N° 1 TOOL HOLDER S12C x 80 mm (COMPLETE WITH WRENCH AND TORX SCREW)

N° 5 TOOL-HOLDER EXTENSIONS (Ø 90 MM + Ø 150 MM + Ø 230 MM + 2 KNUX TYPE EXTENSIONS LGTH 100 MM + 150 MM),

N° 1 SMALL HOOK ø 35mm (device for regulating cutting depth of tool holder)

N° 1 MICROSPAND (MODULAR DEVICE USED FOR INTERNAL MEASUREMENTS)

N°3 MICROSPAND EXTENSIONS (n° 1) 100 MM + (N° 2 ) 50 MM 

N°1 COMPARATOR 1/100

N°1 COMPARATOR  EXTENSION

N°2 COMPARATOR HOLDER 8/8 – 10/8

N° 1 WELDING TORCH CABLE WITH EUR-FITTING,

N° 1 TELESCOPIC WELDING TORCH SHAFT Ø 40 MM TOTAL LGTH. 1500 MM,

N° 2 ADAPTING BUSHINGS FOR TORCH SHAFT LGTH 90 – LGTH. 150

N° 4 TORCH-HEADS FOR INTERNAL OVERLAY WELDING C/W WELDING WIRE NOZZLES AND GAS DIFFUSER (B 125 MM + C 90 MM + G 180 MM + M 70 MM),

N° 1 TORCH-HEAD FOR EXTERNAL OVERLAY WELDING C/W WELDING WIRE NOZZLES AND GAS DIFFUSER (A 320 MM),

N° 3 TORCH-HEADS EXTENSIONS (D 55 mm + E 45 mm + H 135 mm)

N° 1 LATHED WELDING WIRE NOZZLE Ø 0.8

N° 2 SHORT WELDING WIRE NOZZLES ø 0,8 mm – ø 1 mm,

N° 2 LONG WELDING WIRE NOZZLES ø 0,8 mm – ø 1 mm,

WRENCHES

OPERATION MANUAL

N° 1 TROLLEY (containing machine and components)

Equipment upon Request

KIT  
KIT ø 30 mm

For boring starting from Ø 32 mm
Composed of:
·      N° 2 connectable tool-holder shafts ø 30 mm length. 1000 mm + 1000 mm (Tot. Usable lgth. 1950 mm)
·      N° 3 adapting bushings ø50xø30x80 mm
·      N° 1 adapting bushing ø50xø30x90 mm
·      N° 1 adapting bushing ø50xø30x150 mm
·      Centering kit composed of:(N° 2 rings ø30 mm-N° 6 bosses M10-N° 6 screws M10x60 mm
·      N° 1 tool holder S10C 33 mm (COMPLETE WITH WRENCH AND TORX SCREW)

KIT 2000 ø 50 mm

For facing bosses, creating circlip grooves, external machining
Composed of:
·      N° 1 gear box
·      N° 3 brackets 30x25x270 mm
·      N° 3 brackets 30x30x305 mm
·      N° 1 fixed wrench 19

CERTIFIED TEST – STEEL C45

DIAMETER mm Ø150 Ø400
CUTTING DEPTH mm 5 in the radius
10 in the diameter
3 in the radius
6 in the diameter
FEED SPEED mm/min 15 10

Control Panel

An electronic circuit has been inserted to guarantee a major safety in operation and to safeguard the rotation motor from excessive strain in case of an incorrect setup of the parameters, as well as to compensate possible critical points in machining. It automatically and proportionally reduces the feeding speed to reach the maximum strain point of the rotation motor, in order to dynamically reduce the load of the work, without passing the stop point for protection.
Thanks to the led bar called STP, it is possible to constantly monitor the motor’s work load, so to be able to optimize the choice of the parameters (rotation speed and feed speed),  based on the hardness of the material, the type of tool being used, to the machining diameter and to routing diameter of the tool. Furthermore, the bar signals in advance the alarm condition and the subsequent shut down of the control panel, flashing until the working conditions are restored.

Product Data Sheets

The technical characteristics include:
AC 110  ~ 220  50 / 60 HZ WITH AUTOSELECTION OF MAINS VOLTAGE, WITHOUT THE USE OF TRANSFORMERS OR INVERTERS; ELIMINATING ELECTROMAGNETIC INTERFERENCES
ESPS ® TORQUE ELECTRONIC RUNNING OF THE TWO MOTORS WITH ELECTROMECHANIC SYNCHRONIZATION
DISPLAY FOR SPEED OF ROTATION REVOLUTIONS
ACOUSTIC WARNING WITH DISPLAY WITH FIGURED SIGNALS OF POSSIBLE FAULTS DURING THE RUNNING OF THE ROTATION  MOTOR
DISPLAY FOR SPEED OF FEEDING REVOLUTIONS
ACOUSTIC WARNING WITH DISPLAY WITH FIGURED SIGNALS OF POSSIBLE FAULTS DURING THE RUNNING OF THE FEEDING  MOTOR
MAIN SWITCH
EMERGENCY SWITCH
INVERTER DX/SX FOR FEEDING
INVERTER DX/SX FOR ROTATION
POTENTIOMETER FOR ROTATION REGULATION
POTENTIOMETER FOR FEEDING REGULATION
SWITCH FOR RAPID TRANSLATION OF THE SHAFT
Back to top