Check the exchange rates
West Country Welding Supplies

Hypertherm Powermax65 - West Country Welding Supplies, UK - West Country Welding Supplies, UK

Hypertherm Powermax65

Hyperterm Powermax 65Handheld or mechanized plasma system
for cutting and gouging metal

Overview

Operating data
Cut capacity Thickness Minimum Cut Speed
Recommended 3/4" (19mm)  20 ipm (500mm/min)
Severance 1-1/4" (32mm)  5 ipm (125mm/min)
Gouge Capacity
Metal removed per hour: 10.7 lbs (8.8 kg)
Depth x width: .14" (3.5mm) x .26" (6.6 mm)

Applications

  • Smart Sense technology automatically adjusts the gas pressure according to cutting mode and torch lead length for optimal performance.
  • Boost Conditioner circuit (on CSA models) improves performance on low-line voltage, motor generators, and fluctuating input power.
  • Fast Connect torches, CNC interface, and four work lead styles increase versatility for handheld and meachanized use.
  • Simplified control panel with LCD screen for easy operation

Key Torch Advantages

  • 15 degree and 75 degree Duramax hand torchesenable operators to easily select the right tool for the job. The handle is more heat resistant and performs at least five times longer in high impact tests than previous torches. 
  • Standard and short-barreled Duramex series machine torches allow a wide variety of mechanized applications with X-Y tables, track systems, pipe and robotic cutting systems.
  • Conical Flow noxxle increases arc energy density for superior cut quality with little dross.
  • Patent pending shield reduces dross and enables smoother drag cutting for a better cut.

  

Specifications

Input Voltages
(±10%)
200 - 480 V, 1-PH, 50/60Hz CSA
200 - 600 V, 3-PH, 50/60Hz CSA 
400 V, 3-PH, 50/60Hz CE
Input Current @ 12.2kW

200/208/240/480 V, 1-PH CSA 
200/208/240/480/600 V, 3-PH , CSA
380/400 V, 3-PH, CE

Rated Output Voltage 139 VDC
Output current 20 - 65A
Duty cycle @ 40°C (104°F) 50% @ 65A, 230-600 V 1/3-PH
40% @ 85 A, 200-208 V, 1/3-PH
50% @ 85 A, 380/400 V, 3-PH
Output for 100% duty cycle
@ 104°F (40°C)
46 A @ 230-600 V, 1/3-PH
Maximum OCV 295 VDC (CSA), 270 VDC (CE)
Dimensions with handle 19.7" (500 mm) D; 9.2" (234 mm) W;
17.9" (455 mm) H
Weight with 25' Torch 64 lbs (29kg) CSA  
57 lbs (26 kg) CE
Gas Supply Clean, dry, oil-free air or nitrogen
Flow rate 400 scfh; 6.7 cfm (189 l/min) @ 85psi
Input power cable length 10' (3 m)


Engine-driven generator operation

Engine Drive
Rating (kW)
System Output
(amps)
Performance
(arc stretch)
15  65 Full
12  40  Full
18  30  Full


Cut Chart

Material Thickness Current Maximum cut speed*
  inches mm amps ipm mm/min
Mild Steel 10 GA
1/4
1/2 
3/4 
1  



12
19
25

45
65 
65 
65
65 

205  
145  
50  
24  
13  

5000  
3900 
1430 
610  
350 

Stainless Steel 10GA 
1/4  
1/2 
3/4
 3 

12 
19
45
65
65
65
168  
120 
 40 
 19
4200 
3800 
1150 
490
Aluminum 1/4
1/2  
3/4
 6 
12
19 
65
65
65 
190  
60  
30  
 
5500  
1660 
770  

* Maximum cut speeds are the results of Hypertherm’s laboratory testing. For optimum cut performance, actual cutting speeds may vary based on different cutting applications. Refer to the operator manual for more details.
Back to top